<track id="11111"></track>

      <strike id="11111"><delect id="11111"><dfn id="11111"></dfn></delect></strike>
      <strike id="11111"><delect id="11111"><progress id="11111"></progress></delect></strike>

            <ol id="11111"><menuitem id="11111"></menuitem></ol>

            <ol id="11111"><menuitem id="11111"><progress id="11111"></progress></menuitem></ol>

            歡迎來到北京多多賓城建筑機械有限公司
            010-61441596
            永光機械
            永光機械
              Product

            產品展示

            產品展示PRODUCT

            GQ40C型鋼筋切斷機


            GQ40C型鋼筋切斷機主要技術參數(鋼筋抗拉強度σb500Mpa以下)

            GQ40 Reinforcing Bar Cutting Machine technical parameters (reinforced ultimate tensile strength σb500Mpa below)

             

            項目/型號

            GQ40C

            切斷鋼筋最大直徑(mm

            φ6-φ40

            切斷Ⅱ級螺紋鋼規格(mm

            φ6-φ32mm

            切斷Ⅲ級螺紋鋼規格(mm

            φ6-φ32mm

            切刀公稱沖程(mm

            34

            連續切斷次數(次/min

            32

            電動機型號

            Y100L-2

            電動機功率

            3.0Kw

            額定電壓

            380 V±5%

            電動機轉速

            2880r/min

            外型尺寸(mm

            1260×530×730

            包裝尺寸(木包出口型)

            1320×600×830 mm

            整機質量

            350±10Kg


            品牌型號  :  GQ40C 

            GQ40C鋼筋切斷機,適用于建筑工程上各種鋼筋混凝土中普通碳素鋼及熱軋圓鋼和螺紋鋼的切斷,為您的施工降低大量的人力,大幅提高功效。該機具有以下特點。

            1、  體積小、結構緊湊、噪音低,沖程大。

            2、  潤滑性能好:采用箱式封閉結構,齒輪飛濺潤滑(油面應不高于油標刻線,使機器始終處于適當的潤滑狀態)

            3、  功率損耗少:因潤滑條件的改善,齒輪軸端采用滾動軸承,阻力小,與同類切斷機相比同負載時功率損耗可降低三分之一。

               移動方便:四輪著地,機動靈活,穩定可靠,維修方便

             GQ40C Reinforcing Bar Cutting Machine, is usedto cut off all kinds of normal carbon steel, The cross-section of the steel bar end cut by this machine is very parallel andlevel, which can be directly for threading working. It reduce the worker numberand improve the efficiency significantly. This machine has the

            followingcharacteristics.

            1. Small volume, compactstructure, low noise, large stroke.

            2. Lubricating performance: adopt the box-typeclosed structure, gear splash lubrication (oil surface should notbe h    igher than standard oil

            groove, so that the machine is always in a properlubrication state)

            3. Less power loss: due to the improvement oflubrication condition, gear shaft end uses rolling bearings, theresist    ance is small, compared

            with the same kind of cutting machine, the power loss can bereduced

            by 1/3.

              Convenient movement: the four wheelson the ground, flexible, stable

             and reliable, convenient maintenance.


            Copyright 2017 北京多賓城建筑機械有限公司 All Rights Reserved 京ICP備17023354號-1
            技術支持:北京網站建設
            亚洲男人的天堂网站,免费三级现频免费观看,国产老色批视频在线观看应用

              <track id="11111"></track>

                <strike id="11111"><delect id="11111"><dfn id="11111"></dfn></delect></strike>
                <strike id="11111"><delect id="11111"><progress id="11111"></progress></delect></strike>

                      <ol id="11111"><menuitem id="11111"></menuitem></ol>

                      <ol id="11111"><menuitem id="11111"><progress id="11111"></progress></menuitem></ol>